MEHR ALS 100 JAHRE VON ERFAHRUNG | GRÖSSTES LAGER IN EUROPA | DIENSTLEISTUNGEN NACH MASS

Rubber products

Gummiplatten

VR Trade ist der Spezialist für die Lieferung einer Vielzahl von Gummiplatten und Elastomeren, die zur Herstellung von Dichtungen verwendet werden können. Zum Sortiment gehören Vollgummiplatten in Elastomerqualitäten wie SBR, NBR (Nitril), EPDM, CR (Neoprene) und NR (Para). Wir haben auch sehr spezielle Materialien wie Viton® (FPM oder FKM), Polyurethan (PU) und Silikonkautschuk auf Lager. All dies in vielen verschiedenen Stärken.

Gummiplatten finden sich in vielen Anwendungen in Industriebereichen wie Chemie und Petrochemie, Schifffahrt, Versorgung, Bauwesen, Automobilindustrie, Lebensmittel- und Pharmazie sowie Maschinen- und Gerätebau.

Es muss die Umgebung berücksichtigt werden, in der das Elastomer arbeitet und die Anwendung , die es erfüllen soll. Bei Zweifeln über die Wahl der passenden Qualität berät das Team von VR Trade Sie gerne umfassend und kompetent.

Praktische Anleitung zur Auswahl von Gummimaterialen

Um die Auswahl der richtigen Gummiqualität für Ihre Anwendung zu erleichtern, können Sie dieses handbuch herunterladen.

SBR rubber sheeting

Styrene-butadiene Rubbers possesses properties similar to those of natural rubber. Temperature range -20°C to + 70°C.

CR (Neoprene) rubber sheeting

Chloroprene, generally known as Neoprene, has more resistance than natural rubber to sunlight, ozone and oxidation. It has good resistance to heat and does not soften as natural rubber does under severe exposure. It has moderate oil resistance but is not suitable for use with petrol. It can be compounded to possesses flame retardant properties.

NBR (Nitrile) rubber sheeting

Generally known as Nitrile, it has excellent resistance to water, oil, fuel and other petroleum products. It is superior to most elastomers in compression set, cold flow and abrasion resistance. It does not, however, posses good resistance to ozone, sunlight or weather. Temperature range -20°C to + 80°C.

EPDM rubber sheeting

Ethylene Propylene rubber has outstanding resistance to ageing, weathering, ozone, oxygen and many chemicals. It has high and low temperature stability as well as steam and water resistance. It has a good resistance to glycol-ether hydraulic fluids but is not suitable for contact with petroleum liquids. Operational temperature range -25°C to + 100°C.

NR (Para) rubber sheeting

Natural rubber offers a good balance of properties, particularly for mechanical applications and can be compounded to produce high resilience, good tensile strength, low compression set and high tear properties over a wide range of hardnesses. The abrasion resistance of natural rubber is good. It has better resilience, and maintains flexibility at lower temperatures better than most synthetics. However, natural rubber is less resistant to ozone, petroleum oils and fluids than some of the synthetics. The operational temperature range of natural rubbers is -25°C to + 80°C.

Silicone (MPQ) rubber sheeting

Silicone rubber has excellent resistance to temperature extremes. Temperatures as high as 200°C have a little effect on the physical properties of the elastomer. However, it has poor tensile strength, tear, abrasion and steam resistance. It has very good resistance to sunlight, ozone, oxygen, gases and possesses good electrical insulation properties, water repellency and non adhesiveness. Temperature range -60°C to + 220°C.

Fluor Elastomer (FPM/Viton®) rubber sheeting

Viton® has a good resistance to most chemicals and commercial fluids. It has the ability to retain strength at elevated temperature and to withstand embrittlement during long term heat exposure. Temperature range -15°C to + 250°C.

PU (Polyurethane) sheeting

Polyurethane elastomers have outstanding abrasion resistance at moderate temperatures. It has very high tensile strength, tear strength and load bearing capabilities. It has resistance to oils, certain solvents, greases, ozone, sunlight and weather. Resistance to acids and alkalies is poor. Temperature range -30°C to + 80°C.

Flange gaskets

In addition to rubber sheets, we also have a wide range of flange gaskets. These seals can be supplied in all standard as well as in special dimensions. We supply versions with and without bolt holes. Standard sizes we supply are from DN15 to DN600.

  • SBR
  • EPDM
  • Neopren (CR)
  • Nitril (NBR)
  • Nitril (NBR) – Lebensmittequalität
  • Naturkautschuk (NR)
  • Silikon
  • Viton®
  • Polyurethan (PU)
  • PTFE Platten
  • PTFE Stäbe
  • Gummigranulat
  • PVC transparent
  • Gummiblock
  • Gummi streifen